POLYFLEX TPE

 

Material: TPE (Thermoplastic elastomer)

SBS – Polyflex

SEBS – Polyflex

TPV – Polyflex

TPO – Polyflex


SBS – Polyflex

The ratio between the molecular weight of the polystyrene block and that of the butadiene affects the morphology of the elastomer and determines the final characteristics of the product. With a low content of polystyrene, the elastomer represents the continuous phase in which the polystyrene is dispersed. As the polystyrene content increases, the morphology of the rigid dispersed phase (polystyrene) changes from a structure with spheres to a structure with cylinders; the further increase in the quantity of polystyrene at first causes the formation of a lamellar structure, followed by a phase reversal during which the cylinders and then the polydiene spheres are dispersed in a polystyrene matrix. The mechanical properties of the co-polymers with styrene blocks are very similar (at ambient temperature) to those of vulcanized rubber, with typical ultimate strengths of 30 MPa and elongations up to 800%. SBS compounds are commonly used in applications where resistance to chemical agents and aging is not a decisive factor.

PROPERTIES

  • Hardness: shore A from 30 to 90
  • Operating temperature: from -40 to +60 °C
  • Weak against atmospheric agents
  • Good resistance to abrasion
  • Easy processability
  • Easy to colour
  • Compatible with PS, PP, EVA
  • Grades for foodstuff contact
  • 100% recyclable
APPLICATIONS

  • Household items
  • Caps
  • Toys
  • Household appliances
  • Cable trays
  • Remote control covers
  • Furniture
  • Support feet
  • Construction
  • Seats
  • Portmanteaus

Datenblatt: Polyflex SBS Shore A H30 CP0930-00


Datenblatt: Polyflex SBS Shore A H40 CP 9040-03


Datenblatt: Polyflex SBS Shore A H50 CP0950-04


SEBS – Polyflex

The hydrogenation of an SBS rubber-whose elastomeric block contains at least 40% of 1.2 units – leads to the formation of an elastomeric segment in which ethylene units alternate statistically with butylene units (with gives it the name SEBS). These materials, which feature an excellent resistance to oxidation and to which large quantities of plasticizing agents and charges can be added, are used for the most part in the manufacture of technical articles, sports items and automobile passenger compartment components. Compounds made with SEBS are characterized byexcellent mechanical properties, good resistance to heat and to chemical agents. SEBS compounds offer excellent resistance to atmospheric agents, to UV rays and to ozone, thus representing the ideal choice for outdoor applications and in situations where the product is expected to last a long time.

PROPERTIES

  • Operating temperature from -40 to 110 °C
  • Density from 0.89 to 1.20 g/cm3
  • Good resistance to atmospheric agents
  • Excellent resistance to UV rays
  • Easy to colour
  • Good compression set
  • Good resistance to abrasion
  • Good processability
  • Grades with Cork and Wood „CK-WD Series“
  • Transparent grades „UL Series“
  • Grades for foodstuff contact
  • Compatible with PP, PS, EVA, TPU, PA
APPLICATIONS

  • Household items
  • Caps
  • Toys
  • Household appliances
  • Cable trays
  • Door profiles
  • Furniture
  • Footwear
  • Construction
  • Vacuum cleaners
  • Seats
  • Fins
  • Tyres

Datenblatt: Polyflex SEBS Shore A H30 CP0531-00


Datenblatt: Polyflex SEBS Shore A H40 CP 0536-01


Datenblatt: Polyflex SEBS Shore A H54 CP0555-15


Datenblatt: Polyflex SEBS Shore A H80 CP0580-66


TPV – Polyflex

During the course of the 1990s, EPDM was the most widely used elastomer (95%) in dynamic and semi-dynamic automotive insulation applications. However, around the beginning of 2000, the sector especially focused on a new material that offered pe rformances such as the EPDM, but that could be easily processed like thermoplastic material. Polyflex TPV is a dynamic mix between EPDM and polypropylene. Polyflex offers a combination of excellent thermoplastic and elastomeric properties, hardness, flexibility, elasticity. Thanks to its characteristics, TPV allows considerable savings during assembly of the finished pieces. TPV scrap is 100% recyclable and can be reworked. Thanks to Polyflex TPV, the weight of the moulded pieces can be reduced by 20-30%, thus cutting down on costs. Expensive secondary operations related to the finish can be reduced or even eliminated. The versatility of the TPV encourages the design of new systems and the consolidation of parts, so that other thermoplastic materials can be easily integrated and metal inserts can be eliminated. At the end of the process, the costs of finished parts are usually 20% lower compared to those of EPDM.

PROPERTIES

  • Shore hardness from 35 A to 60 D
  • Operating temperature from -40 to 130 °C
  • Density from 0.89 to 1.20 g/cm3
  • Good resistance to atmospheric agents
  • Excellent resistance to UV rays
  • Good resistance to chemical agents
  • Excellent compression set
  • Good resistance to abrasion
  • Good processability
  • Compatible with PP
  • 100% recyclable• Shore hardness from 35 A to 60 D
  • Operating temperature from -40 to 130 °C
  • Density from 0.89 to 1.20 g/cm3
  • Good resistance to atmospheric agents
  • Excellent resistance to UV rays
  • Good resistance to chemical agents
  • Excellent compression set
  • Good resistance to abrasion
  • Good processability
  • Compatible with PP
  • 100% recyclable
 APPLICATIONS

  • Air ducts
  • Profiles
  • Automotive bellows
  • Electric tools
  • Cable trays
  • Door gaskets
  • Furniture
  • Construction
  • Fenders
  • Seats
  • Buttons and knobs
  • Washing machine

Datenblatt: Polyflex TPV Shore A H40 CP0440-00


Datenblatt: Polyflex TPV Shore A H50 CP0450-00


Datenblatt: Polyflex TPV Shore A H55 CP0455-00


Datenblatt: Polyflex TPV Shore A H60 CP0460-00


Datenblatt: Polyflex TPV Shore A H70 CP 0470-00


Datenblatt: Polyflex TPV Shore A H75 CP0475-00


Datenblatt: Polyflex TPV Shore A H80 CP0480-00


Datenblatt: Polyflex TPV Shore A H85 CP0485-00


Datenblatt: Polyflex TPV Shore A H90 CP0490-00


Datenblatt: 


TPO – Polyflex

Polyflex TPO is the new family of elastomers made with polyolefins. Polyflex TPO-XL is a compound made with dynamically reticulated PP/POE that represents a valid alternative to PVC in extrusion and injection applications.

PROPERTIES

  • Shore hardness from 55 A to 50 D
  • Operating temperature from -40 to 80 °C
  • Good resistance to chemical agents
  • Good resistance to atmospheric agents
  • Easy processability
  • Easy to colour
  • Compatible with PP, PE, EVA
  • Grades suited for foodstuff contact
  • 100% recyclable
APPLICATIONS

  • Gaskets
  • Knobs
  • Small mats
  • Footwear
  • Construction
  • Electrical components